hi how much can you get a boyesen flywheel cover for a kx500 and also a inner clutch hub, both are the same from 1989/2004 models thanks mark

thanks very much will get back to you soon, it cost me £45 for a clutch hub a year ago so £28.15 a good price and if i order it with you wourd you bring it to the track next time as i need a few more parts first also good price on the cover aswell thanks mark

yes no probs mark, usually the deliver the next day depends on how your paying, if you pay by check make sure your card number is on the back, thats the best way i think.
All orders over £150 get free delivery next day

If you want the parts just let me no and to save time bringing them up the track cos you might need to fit the parts on your bike, i will deliver them to your house if you live local, we try to help out our riders as much as possible, thats wot we are there for, anyway let me no wot you wanna do

all the best

martin

Hi,
how much for ktm 250sxf 2006 clutch plates?.....apparantly the clutch in the ktm sxf 06 is the same as honda so i can use honda clutch plates but not sure what ones...
so umm how much for 250sxf 06 clutchs plates frictions and steels
thanks.

hi chris

clutch plates (friction fibre - kevlar) £32.75 + vat = £38.48

as for the steel ones there is no price in the book, id have to ring them, looking at the other prices i should imagine they will be roughly the same price

the part no is different to the honda so i dont think they will fit

hi, could you give me a prive on a boyesen electrics cover for a CR500 1988? i also need rear brake pads, many thanks leadleg32

boyesen aluminium ignition cover £44.95 + vat = £52.82

rear brake pads

ceramic carbon pad £6.95 + vat = £8.17
dunlopad pad £11.50 + vat = £13.51

hi i have been offerd a boyesen rad valve only used 3 times how much can you get one for kx500 or even a v force 3 thanks mark

hi mark

boyesen rad valve block £95.95 + vat = £112.74

how come you are a lot cheeper than the shops , and if i was to order the boyesen flywheel cover with you how do i do this and there are 3 tipes i think like,
black,brown,and like a black marble tipe wich is the one i want i live in mountai ash
thanks mark

i have a trade account and im helping you out by giving it to you at trade price, im not after profit like the shops i just wanna help out our riders, if i was to sell online like ebay i would put between 50-60% on top thats what the shops do.

minimum orders are £30 plus £7 delivery
orders over £150 are delivered free

the easiest way would be to pay by cheque but you have to put your bankers card number on the back.

the goods will be delivered to my address, upon arrivals of goods

1) i will bring them to the next track day
2) you can collect them from me in caerphilly
3) i can deliver them to you as long as you cover my diesel

its as simple as that

you say the fly wheel cover do you mean ignition cover where the magneto is, not the clutch cover

colours available - silver/black or gold / black

hope this is enough info mark

yes i meen the ignition cover thanks

yes i need to sort a thew other parts out first but by the time of 3rd feb track day i probaly have orderd them with you, you said it was £43.32 can you get these in aluminium or just plastic thanks mark

ok thanks as i said before im making a kx500 hybrid and my engine is in bits ive bourht a lot of parts of ebay aredy like
wieco piston
mitaka clutch basket
main beirings
both sets of clutch plates
full gasket kit
full oil seal kit
so im trying to find all parts first before i start becuse to swop the engine you need cut all engine mounts from frame and reweld them get a cr500 pipe and cut the end of and weld the kx end on then have to mill both sides of the crank cases to fit the swing arm and make new top engine mounts so very big job but the parts i need to finish the engine are
inner clutch hub
two gear box berings
clutch basket needle bering
small end bering
boyesen cover ignition
the nut that holds the magniteo on
and the very last part is a cr500 pipe 2001
i can also get all the part numbers for the kx parts of .wwwbuykawasaki.com/
if you wish thanks mark

in the gear box there are 4 berings one needle and three normal i think its best to get all 4 if you need all part numbers i will get them but i can't order any parts at the momunt intill i make sure it can be done ,and when i start building it i will be takeing photos from start to finish if any one wants any pics of how to make one or to post on here because a lot of peaple want to make hybrids now, many thanks mark

crikey mark you got your hands full there m8.
when you want to order them just tell me the exact wording to the parts you want, i got all the part numbers in the book so shoudnt be a problem there, if you want to add the parts numbers then by all means do so

i no its a kx500 1988 model

when your ready m8 just put them on here, and i think it would be a good idea for people to no how exactly how to build a hybrid, please by all means place topics on here, i can even give you your own forum so you can add them step by step, along with pics bcos id def be interested, ive built my own bike b4 and i no it takes hard work and dedication, so i wish you luck, just 1 thing, id luv a go when you finish the fooooooking beast cos its gonna tear your hands off lol

all the best
martin

ok no probs when i get the rest of the parts ready il order them, and i will be useing a 92 model engine but if you want photos thats fine i will take very good pics of all mods to frame,engine,pipes,all welding before and after i dont know if you have ever had a go of a 500 2 stroke but iv drove
06 rmz 450
06 crf 450
05 yzf 450
lot of 250,s and no bike will match the 500, but 4 strokes have better grip less spin and turn and jump a lot better but the best allround bike iv drove is my kx250 so with a 500 engine in it it will still be lighter than 450's but it will still be hard to ride thank i will order parts soon mark

hi what about a price on a kick start 1992 kx500 thanks

kx500 1992 model

hi these are some of the parts i need
inner clutch hub part number 13087-1138

clutch needle bearing part number 92046-1193

small end bearing part number 13033-1055

gear box bearing needle 1 only part number 92046-1170

transmission shaft out put part number 13128-1150 a little worn

and also the boyesen magneto cover /gold

also need the nut that holds the magneto on, can't find part number,

the 3 other gear box bearings i dont know part numbers but i can get these bearings
many thanks mark

yes sure you can have a lap or two when its done the 500's are really nice

hi martin never mind about geting parts ,i think i'l just try and find a complete bottom end or full bike but thanks for your help but when i want cases and any other parts i send you a check and email many thanks mark

hi jus woundering has any 1 got a spare rear wheel for dave's cr250 2004 thks

hi its carls son dave yh give him a ring and c how much he wants for it

i need it for next week u c

hi i was out on my kx500 on sunday and the kick start snaped clean of can you get one thanks i am also bidding on one on ebay aswell

HI THERE MATE. MY 02 426F IS BEIN REBUILT NOW THIS MINUTE.

I AM LOOKIN FOR NICE PRICES ON CRANK KIT AND PISTON IF POSS PLEASE BUT!

CHEERS CLIFF

we'll get back to you has soon has we can on the price m8

K NO P'S

SAFE AS HOUSES

how much wud a front sproket n a back sproket an a new chain for a yz 125 03 model cost me ????????

hi m8
i need to know the num of teet on the front sproket and the back sproket m8

orit en ill let u no in a day or to ....... thnk bro !

ok m8